济南模型公司
  • 山东省济南市槐荫区古城
  • 商业街(山东省肿瘤医院西邻)
  • 电话:0531-55504101
  • 传真:0531-86013022
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    建筑模型中的汽车具体是怎么制作的
    2016-7-27 17:09:01
    汽车是建筑模型环境中不可缺少的点缀物。汽车在整个建筑模型中主要有两种功能,一是提示停车场位置,二是表示比例关系,人们可以通过此类参照物来了解建筑的体量和周边关系。另外,在主干道和建筑模型旁边摆放汽车模型,还可以增强环境效果。
    Automobile is an indispensable ornament in the environment of building model. There are two main functions of the car in the whole building model, one is to indicate the location of the parking lot, the two is the proportion of relationships, people can understand the construction of the volume and the surrounding relationship through such reference. In addition, in the main road and building models placed next to the car model, you can also enhance the environmental effects.
    目前,作为汽车的制作方法及材料有很多种,一般较为简单的制作方法有两种:
    At present, there are many kinds of methods and materials for the production of cars, and there are two kinds of simple production methods:
    1、翻模制作法:首先,模型制作者可以将所需制作的汽车,按照比例和车型各制作出一个标准样品,然后,可用硅胶或铅将样品翻制出模具,再用石膏或石蜡进行大批量灌制。待灌制、脱模后,统一喷漆,即可使用。
    1, turn over the mold making method: firstly, model makers can will be what is needed for the production of cars, according to the proportion and the model making out a standard sample, and then available silica gel or lead will sample of mold, then paraffin wax or plaster was rerecorded in large quantities. To be cut, after stripping, uniform paint, can be used.
    2、手工制作法:利用手工制作汽车,首先是材料的选择。如果制作小比例的模型车辆,可用彩色橡皮,按其形状直接进行切割。如果制作大比例汽车,最好选用有机玻璃板进行制作。具体制作时,先要将车体按其梯面进行概括。以轿车为例,可以将其概括为车身、车棚两大部分。汽车在微缩后,车身基本是长方形,车棚则是梯形。然后根据制作的比例用有机玻璃板或ABS板按其形状加工成条状,并用三氯甲烷将车的两大部分进行粘接。干燥后,按车身的宽度用锯条切开并用锉刀修其棱角。最后进行喷漆即可。若模型制作仿真程度要求较高时,可以在此基础上进行精加工或采用市场上出售的成品模型汽车。

    2, the manual production method: the use of hand made cars, the first is the choice of materials. If you make a small proportion of the model vehicle, can be colored rubber, according to the shape of the direct cutting. If making a large proportion of the car, the best choice for the production of organic glass plate. Specific production, the first body should be summarized in the ladder. The car for example, can be summed up in two parts, car shed. The car in miniature, the body is basically rectangular, trapezoidal shed is. Then according to the proportion of production with organic glass plate or ABS plate according to their shape processing into strips, and the car of the two parts are bonded with chloroform. After drying, the width of the saw blade body to cut and repair its edges with a file. Finally, spray painting can be. If the model is required to produce a high degree of simulation, it can be used on the basis of the refined processing or the use of the market to sell the finished product model.

    本文由淄博模型公司发布,浏览网址:http://www.

    版权所有:济南市槐荫区视野模型设计制作中心  Copyright @ 2011-2012  电话:18660800958  传真:0531-55504101  鲁ICP备11014722号  地址:济南市槐荫区古城商业街  网址:www.  
友情链接:    幸运飞艇官方网站   幸运飞艇导航   大通彩票   热购彩票   热购彩票