济南模型公司
  • 山东省济南市槐荫区古城
  • 商业街(山东省肿瘤医院西邻)
  • 电话:0531-55504101
  • 传真:0531-86013022
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    怎样清洁房产模型?
    2017-8-21 11:42:36
    售楼处的模型怎么做清洁?
    Sales offices of the model how to do cleaning?
    1、模型马路清理:可以使用小号毛刷清理飞尘,然后使用毛巾蘸水擦拭,黑玻璃马路需用酒精擦拭。
    1, model street cleaning: you can use small brush to clean up dust, and then use towels dipped in water to wipe, black glass road with alcohol wipe.
    2、济南模型公司哪家好http://www./草坪的清理:最好使用吹风机或专用吸尘器处理。
    2. Lawn cleaning: it's better to use a hair dryer or a vacuum cleaner.
    3、模型建筑清理:只能使用小号毛刷细致清理了,注意脱落物件及时使用502胶水加固。
    3, model building cleaning: only the use of small brush carefully cleaned, pay attention to falling objects, the use of 502 glue reinforcement.
    4、花草树木清理:花草树木清理也是模型模型清理上的难点,最好先用吹风机强风除尘,然后使用自喷清洗及喷新处理。
    4, clean up the flowers and trees: trees clear model is difficult to clear the flowers, it is best to use the blower wind dust, and then use the spray cleaning and spray processing.
    5、模型模型制作时要封膜处理,后期清理起来就很方便。
    5, the model should be sealed when making, and it is convenient to clean up at the later stage.
    工业模型制作的基本流程是什么样的?
    What are the basic processes for manufacturing an industrial model?

    1、设计图纸:根据自己的要求设计图纸。

    济南模型公司哪家好

    1, design drawings: according to their own requirements design drawings.
    2、选色喷漆:根据图纸的设色调出相应颜色的油漆来,喷在相应的PVC板或3D打印的模型上。PVC板需送到设计部进行雕刻。
    2, choose the color of paint: paint colors according to the drawing out of the corresponding color, spray on the PVC board or 3D to print the corresponding model. PVC boards need to be sent to the design department for engraving.
    3、雕刻部件:根据实际情况按比例设计出的结构,并在电脑上分解成不同的板块,工业模型基本上是和建筑模型做法相似,依图纸按一定的比例缩小,雕刻出板块,用三氯甲烷粘合。
    3, engraving parts: structure according to the actual situation according to the proportion design, and is decomposed into different sectors in computer, industrial model and building model is basically similar, according to the drawings by a certain scale, carving out a plate with chloroform adhesive.
    4、组合部件:根据说明和粘合方式,用三氯甲烷将PVC板块粘合成工业模型的大致形状。
    4, composite parts: according to the instructions and methods of adhesion, use chloroform to block the PVC plate into the general shape of the industrial model.
    5、整体组合:制作配件,模型整体组合。
    5, the overall combination: make accessories, model the whole combination.
    制作好的工业模型一般情况下是放在玻璃罩里,而不放在台子上。这一点请大家多加注意。
    A good industrial model is usually placed in a glass case rather than on a table. Please pay more attention to this point.
    版权所有:济南市槐荫区视野模型设计制作中心  Copyright @ 2011-2012  电话:18660800958  传真:0531-55504101  鲁ICP备11014722号  地址:济南市槐荫区古城商业街  网址:www.  
友情链接:    全民彩票   幸运飞艇导航   爱彩彩票     金牌彩票