济南模型公司
  • 山东省济南市槐荫区古城
  • 商业街(山东省肿瘤医院西邻)
  • 电话:0531-55504101
  • 传真:0531-86013022
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    模型公司沙盘模型如何安装光电部分
    2017-8-28 10:11:57
    我公司专业从事沙盘模型的设计制作,今天济南模型公司要给大家介绍沙盘模型如何安装光电部分。
    Our company specializes in sand table model design, production, today, Ji'nan model company to introduce sand table model, how to install the photoelectric part.
    A选用防水型灯串联,每串36个灯泡;
    A choose waterproof lights in series, each string of 36 light bulbs;
    B济南模型公司哪家好http://www./将防水型灯安装于河流、山塘水库之下,上面覆盖绿色有机板;
    B waterproof lamp is installed under the rivers, ponds and reservoirs, covered with green organic board;
    C将防水型灯安装于行政区域界线,出露地面0.5公分,用绿色隐盖,每个灯泡之间距离5公分;
    C installed waterproof lights on the boundaries of the administrative area, exposing the ground 0.5 centimeters, with a green cover, each light bulb between 5 cm;
    D将各组灯串联接在灯光控制器上;
    D connect the lights in series to the light controller;
    E外接电源为照明电源,照明电源与总开关之间安装电压稳定器,在每组灯与总开关之间安装图例控制按钮。
    The E external power supply is an illumination power source, a voltage stabilizer is arranged between the lighting power supply and the main switch, and a legend control button is arranged between each lamp and the main switch.
    工业模型的手板应用范围
    Application scope of industrial model board
    1.数码产品(手机,.电话机.数码像框.USB.耳机,摄像头。
    1. digital products (mobile phone, telephone headset.USB. camera. The digital photo frame.
    2.家电医疗产品(电视机,电脑,空调,吸尘器,打印机,复印机.洗衣机,热水壶,按摩器.B超仪。

    2. household appliances, medical products (TV sets, computers, air conditioners, vacuum cleaners, printers, copiers, washing machines, hot water bottles, massage machines, type-B ultrasonic instruments).

    济南模型公司

    3汽车配件(汽车仪表板,车门,汽车空调,汽车DVD车灯.反向盘,保险杠)。
    3 auto parts (car dashboard, door, car air conditioning, car DVD lights, reverse disc, bumper).
    如今的工业模型并非手板那么简单,它已经从数码产品、家用医疗产品和汽车配件等转化为大型的机械模型和工程模型。它甚至比建筑模型规模还庞大,工艺难度系数进一步提高。
    Today's industrial model is not as simple as the hand. It has transformed from digital products, household medical products and auto parts into large mechanical models and engineering models. It is even larger than the size of the building model, and the process difficulty coefficient is further improved.
    建筑沙盘模型的制作分为以下四个步骤:
    The building of sand table model is divided into the following four steps:
    1、直接浇注法:如果造型比较规范,可以采用直接浇注的方法成型。如果形态不能一次浇注成型,可预先浇注出大致形态,成型后再对沙盘模型的表现及细部进行精修细刻,直到最后完成。
    1, direct pouring method: if the molding is relatively standardized, can be used direct casting method molding. If you can form a pouring molding, can advance pouring out general form, forming after the performance and detail of sand model for finishing fine carved, until the final completion.
    2、济南模型公司沙盘模型车削加工成型法:如果比较规整的圆形或者是以此为基本形的造型,可以通过修坯机的车削成型,车削完成后再进行连接、细部修整与刻画,直至达到理想的效果。
    2, Ji'nan model company sand table model turning forming method: if the regular circular or which is the basic shape of the other, by turning molding trimming machine, turning after the completion of connection, fine trimming and characterization, to achieve the ideal effect.
    3、沙盘模型模板刮削成型法:对于横向变化形体的形态,则适合彩模板刮削成型法进行制作。
    3, sand model template scraping forming method: for lateral change of body shape, it is suitable for color template scraping forming method for making.
    4、济南模型公司翻制粗模成型加工法:对于比较复杂的形态,可以用黏土或雕塑泥做类似的粗模,然后再用粗模翻制阴模。翻制的阴模可通过浇注成型,最后再精细加工完成。
    4, Ji'nan model company to make the rough mold processing method: for the more complex form, you can use clay or sculpture mud to do similar coarse mold, and then use the rough mold to make the Yin model. The inverted mould can be finished by pouring and finishing at last.
    版权所有:济南市槐荫区视野模型设计制作中心  Copyright @ 2011-2012  电话:18660800958  传真:0531-55504101  鲁ICP备11014722号  地址:济南市槐荫区古城商业街  网址:www.  
友情链接:    9号彩票   注册送体验金58   热购彩票   诚信彩彩票网址多少   全民彩票