济南模型公司
  • 山东省济南市槐荫区古城
  • 商业街(山东省肿瘤医院西邻)
  • 电话:0531-55504101
  • 传真:0531-86013022
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    工业模型在制作的时候需要注意的事项!
    2018-11-30 10:00:02
    工业模型在制作模型的时分,第一步就是打磨,在打磨过程中需求留意许多地方,模型打磨和涂漆的经验技巧。
    When making industrial models, the first step is polishing. In the process of polishing, we need to pay attention to many places, experience and skills of model polishing and painting.
    当模型组合好后,模型表面会有许多缝隙,这样会严重影响模型的外观,所以必须要对模型缝隙进行修补。主
    When the model is assembled, there will be many gaps on the surface of the model, which will seriously affect the appearance of the model, so the gap of the model must be repaired. main
    要的东西是补土、锉刀和砂纸。别的要留意的是模型在组合时必须下胶水,不然缝隙修补后很易又裂开。补土也叫不地,是专门用来添补模型缝隙的一种有机树脂。种类也有许多。使用时用适当的东西沾取适量抹在想添补的接合线上或凹处,抹的时分要施加必定的压力,将补土填满凹处的每一旮旯。
    What you want is fill, file and sandpaper. Otherwise, it should be noted that the model must be glued when it is combined, otherwise the gap will crack easily after repairing. The filling is also called not land, it is a kind of organic resin specially used to fill the gap of the model. There are also many kinds. When using, apply appropriate amount of stuff on the jointing line or concave place that you want to add. When applying the necessary pressure, fill every corner of the concave place with the filling soil.
    补土的成份中含有可溶解塑料的溶液,所以接触到模型表面时不易脱落。但因其中的溶液会挥发,所以当它完全枯燥硬化后体积会缩小一点。当我们上补土时就要多补一点。使补土有满足体积应付打磨需求。
    The component of the filling soil contains a solution of soluble plastics, so it is not easy to fall off when touching the surface of the model. But because the solution will volatilize, it will shrink a little when it is completely dry and hardened. When we fill the soil, we need to do more. Make the filling meet the volume to meet the grinding requirements.
    等补土完全干后(约四五小时)就可以进行打磨了。先用锉刀锉,要顺着弧度,当锉得差不多时(要自己判别)就换砂纸打磨。砂纸号码越大,代表颗粒越细。有时补土会填了模型的凹线,这时可在补土未干时用刻刀或牙签刻回凹线。打磨好后就要喷上一层水补土,它是液状的,主要能检查修补打磨的情况。同时它是浅灰色的,可以用来作模型的底色。当发现要再修补时就要放上一天,等水补土干后再修补打磨。

    When the soil is completely dry (about four or five hours), it can be ground. First use the file, along the radian, when the file is almost the same (to judge by oneself) change sandpaper grinding. The larger the sand paper number, the finer the particles. Sometimes the filling fills the concave line of the model, and then the concave line can be carved with a knife or toothpick when the filling is not dry. After polishing, a layer of water should be sprayed to make up the soil. It is liquid and can check the condition of repairing and polishing. At the same time, it is light gray and can be used as the background color of the model. When it is found that it needs to be repaired again, it should be put on for one day, and then repaired and polished after the water and soil are dried.

    工业模型是不同从产品实体模型如下︰
    The industrial model is different from the product entity model as follows:
    (1) 不同从产品实体模型,如铸造铁铸造模具或机械模型。物理映射的这样的工业化模式,根据现有的或定型图纸 (定见,三个部分),按比例更大或更小,制成的木材或金属材料制造,此类尺度严格闸口启闭机,肯定精度代表的形象。这个工业模型在生产过程中,不允许任何修改原始图纸和身体的改动,如果你想要改动,某些多边程序,设计师和前导符号,经核准后可以改动。
    (1) Different solid models of products, such as cast iron mould or mechanical model. The industrial model of physical mapping is made of wood or metal materials in larger or smaller proportions according to existing or stereotyped drawings (stereotyped drawings, three parts). This kind of scale is strict with gate hoist, affirming the image represented by precision. This industrial model is not allowed to modify the original drawings and body during production. If you want to change it, some multilateral programs, designers and leading symbols can be changed after approval.
    (2) 不同的雕塑。雕塑根据作者的思想,塑造的艺术处理。完成该形状后,它会给人美的感觉。它寻求更具艺术性,笼统变形可以夸张,和不太实用,但也无法反映的结构、 功用和人机关系。取得了创作,意图。
    (2) Different sculptures. According to the author's thought, sculpture is shaped by artistic treatment. When the shape is finished, it will give a sense of beauty. It seeks to be more artistic, general deformation can be exaggerated, and not very practical, but also can not reflect the structure, function and human-machine relationship. It has achieved creation and intention.
    以上信息是由我们东营模型公司整理发布如果你想了解更多关于模型行业的信息请点击我们的网站:http://www.
    The above information is organized and published by our Dongying Model Company. If you want to know more about the model industry, please click on our website: http://www.!
    版权所有:济南市槐荫区视野模型设计制作中心  Copyright @ 2011-2012  电话:18660800958  传真:0531-55504101  鲁ICP备11014722号  地址:济南市槐荫区古城商业街  网址:www.  
友情链接:    全民彩票   诚信彩彩票官方网址   全民彩票   热购彩票   诚信彩彩票官方网址